Setting Base for Toilet (BFPS1)
Ideal for installation and repair of toilets with lateral setting
Usage
Installation Instructions:
Place toilet on desire location.
• Mark floor with lateral holes of toilet.
• Remove toilet and measure toilet’s wall thickness, increase 20mm on these measure.
• Using this measure, move mark towards sewage outlet. Next, drill with a Ø10mm bit, make a hole on new mark.
• Fix L base using washer and bigger screw. Place toilet, and fix it using smaller screw and lateral washer.
• Install finishing.
Place toilet on desire location.
• Mark floor with lateral holes of toilet.
• Remove toilet and measure toilet’s wall thickness, increase 20mm on these measure.
• Using this measure, move mark towards sewage outlet. Next, drill with a Ø10mm bit, make a hole on new mark.
• Fix L base using washer and bigger screw. Place toilet, and fix it using smaller screw and lateral washer.
• Install finishing.
Colors
• Ideal for installation and toilet repair with lateral attachment
• Comes with bushes, screws and L support
• Screws in stainless steel
• Chromed top for installation finishing
Technical Information
Tap and swipe
| Base for toilet setting | |||
| Code | Measures | ||
| BFPS1 | 17 x 4 x 23 cm | ||