Pressing Template (MANU/GAB | MANUGABA)
The template is an essential part for the installation of the gas piping system, used for press checking.
Specifications
• Accessory for installing the gas piping system.
• Can be stuck on objects, so you don’t lose it.
• It has diameter indications engraved on the piece.
• Made of steel.
• Can be stuck on objects, so you don’t lose it.
• It has diameter indications engraved on the piece.
• Made of steel.
Usage
Used for pressing conference.
Technical Information
Tap and swipe
HOW TO USE:
1) After pressing the pieces, the dimension must be within the value indicated in the table below.
2) Fit the template onto the connection crimps without forcing the template into the connection.
3) If the template fits easily, the crimp is within the pressing tolerance.
4) If the template does not fit, the crimp is outside the pressing tolerance.
Then it is necessary to calibrate the pressing tool according to its manual.
1) After pressing the pieces, the dimension must be within the value indicated in the table below.
2) Fit the template onto the connection crimps without forcing the template into the connection.
3) If the template fits easily, the crimp is within the pressing tolerance.
4) If the template does not fit, the crimp is outside the pressing tolerance.
Then it is necessary to calibrate the pressing tool according to its manual.
| Diameter Ø (mm)) | Pressing tolerance Ø (mm) |
| 16 | =16,40 |
| 20 | =20,40 |
| 25 | =25,40 |
| 32 | =32,40 |
| Code | Model |
| MANU/GAB | no self-service |
| MANUGABA | self-service |