AstraGas Pipe PE-AL-PE (G)
Multi-layer pipe for conduction of combustible gases formed by 5 layers: PE – Adhesive – Aluminium – Adhesive – PE.
Manufactured in yellow color for better identification, can be installed embedded on wall (resistant to cement, lime, etc),flexible which reduces the number of connections and reduces load lost.
Specifications
• Impact resistant.
• Chemical corrosion resistance.
• Lightweight: easy to transport and assemble.
• Clean and safe installation since it does not use sealants and welds.
• Reduction of connection due to its flexibility.
• Less material lost on job site because it is sold in coils with meter to meter mark which facilitates cut.
• UV protection system, allowing use exposed to sun light.
• Reduction of theft because product does not have a secondary market.
• 5 year warranty.
Usage
• Connections for transporting LPG and NG.
• Residential use.
• Maximum temperature and pressure of 60ºC and 5bar.
Colors
Yellow
Technical Information
Tap and swipe
| AstraGas Pipe PE- AL - PE | ||
| Code | Diameter | Coil size |
| G/1620M | 16x12 mm | 100 m |
| G/2020M | 20x16 mm | 100 m |
| G/2525M | 25x20 mm | 50 m |
| G/3230M | 32x25 mm | 50 m |
| Physical and mechanical properties of PE – AL - PE | |
| Linear dilation | 2,3 x 10-5 (K-1) |
| Thermal conductivity | R = 0,004 m2K/W |
| Maximum working temperature | 60 °C |
| Maximum working pressure | 5 bar a 60 °C |
| Roughness | E = 0,007 mm |
| Density | 1,47 g/cm³ |
Video
Regulation
ISO 17484-1:2006 Plastics piping systems - Multilayer pipe systems for indoor gas installations with a maximum operating pressure up to and including 5 bar (500 kPa) - Part 1: Specifications for systems.
