Pex Pipe Single Layer in Roll (C)
Piping for hot and cold water hydraulic installations of cross-linked polyethylene (PEX), flexible material that allows reducing connections, since the pipe itself is used to the change of directions. Produced in white for better identification, it can be installed embedded in the wall (resistant to lime, cement, etc.)
Specifications
• Acoustics: the material reduces noise.
• Inert material: it is not subject to galvanic corrosion, such as copper and iron.
• Chemical resistance: resistant to most chemicals: acids, bases, antifreeze based on glycol etc. Increasing its durability.
• Light material: ease of transport, storage and assembly.
• Resistant to high temperatures: 95°C permanently with occasional peaks of 110°C for 48 hours.
• Freeze resistant: follows the expansion of frozen water without breaking.
• The smooth surface of the tube and the absence of lime deposits and corrosion, associated with the reduced number of connections, allow the system to have low levels of head loss.
• Resistance to impacts and tensions.
• Low heat loss: Low thermal conductivity allows maintaining the water temperature for a long time.
• Does not transmit taste or odor to water.
• Do not expose to sunlight and weather.
• Inert material: it is not subject to galvanic corrosion, such as copper and iron.
• Chemical resistance: resistant to most chemicals: acids, bases, antifreeze based on glycol etc. Increasing its durability.
• Light material: ease of transport, storage and assembly.
• Resistant to high temperatures: 95°C permanently with occasional peaks of 110°C for 48 hours.
• Freeze resistant: follows the expansion of frozen water without breaking.
• The smooth surface of the tube and the absence of lime deposits and corrosion, associated with the reduced number of connections, allow the system to have low levels of head loss.
• Resistance to impacts and tensions.
• Low heat loss: Low thermal conductivity allows maintaining the water temperature for a long time.
• Does not transmit taste or odor to water.
• Do not expose to sunlight and weather.
Usage
• Piping for carrying hot and cold water.
• Residential use.
• In case of an error in the assembly, the connections can be disassembled and reused.
• The joints rotate, allowing adjustments during installation, facilitating the assembly of kits.
• Does not require specialized labor.
•No need for sanding, chemical adhesives, torches and tin.
Technical Information
Tap and swipe
| Pex Pipe Single Layer in Roll* | ||
| Code | Measure | Roll Size |
| C/1618M | 16 mm | 200 m |
| C/2019M | 20 mm | 200 m |
| C/2523M | 25 mm | 100 m |
| C/3229M | 32 mm | 100 m |
| *Do not expose to sunlight and weather. | ||
Regulation
ABNT NBR 15939-1: 2011: Plastic piping system for building installations of hot and cold water - cross-linked polyethylene (PE-X) Part 1: Requirements and test methods.
